Assemble & Install
Assembling and installing your Foil Drive
Installing a V2 Motor on a Carbon Integrated Mast
This guide explains how to correctly install a Foil Drive V2 Motor onto a Carbon Integrated Mast, including preparing the motor puck, applying dielectric grease, securing the motor, setting the motor cable length and completing the installation. Once
Installing Your Foil Drive on an AXIS Pocket Trench Board
The AXIS Pocket Trench has been specifically designed to be compatible with Foil Drive systems while providing a streamlined installation process and improved hydrodynamic performance. This guide explains the correct installation procedure, compatibl
Universal Mini Pod Installation and User Guide
The Universal Mini Pod is a toolless, instant-latching, universal motor pod designed to reduce drag, improve ride feel, and make mast swaps fast and screw-free. It redefines universal mounting through a smaller surface area, improved hydrodynamics, a
How to Install a Cable on a V2 Motor
The Foil Drive V2 Motor uses a removable cable system, allowing you to quickly change motor cable lengths to suit different boards, riding styles, and conditions. This guide will walk you through a fast, safe cable swap to ensure a secure, watertight
How to Install the V2 Propeller Guard
The V2 Propeller Guard provides additional bump protection around the propeller. Correct installation of the red O-ring is critical to maintaining the waterproof seal of the motor. Follow the steps below carefully before heading out on the water. Bef
Foil Drive Gen2 Install | Full Unboxing & Assembly
Installing your Foil Drive for the first time may seem daunting. We supply to you more than you need, so working through the instructions, in the right order, will make your life much easier! Grab your Instruction Manual, get set up with the below vi
How to Measure the Correct Bolt Length for your Gen2
Choosing the correct bolt length for your Gen2 Foil Drive installation is essential for safety, performance, and protecting your equipment. Using bolts that are too short may result in insecure mounting, while bolts that are too long can damage your
Nose Cone Rocker Foam Pads
The Nose Cone Rocker Pads included with your Gen2 Foil Drive are for taking up the space between the battery nose cone and the board if your board features a large amount of nose rocker.
Correctly Closing the Electronics Box Latches
The latches on your Foil Drive system are designed to securely lock the Electronics Box closed while maintaining a reliable watertight seal. When used correctly, they provide even compression of the nose cone against the housing, helping to protect y
Fitting Alloy Propellers and Hubs
Fitting Aluminium Propellers Important Points1. The propellers must be installed in the correct orientation, when done correctly the bolt holes will all line up. 2. The new custom CNC bolts for the three-blade propeller comes with Loctite pre-applied
Universal Mast Adaptor Installation
The V2 Motor Pod is highly durable, made from injected moulded poly carbonate with fiberglass reinforcement, combined with the Universal Mast Adaptor, you'll be flying in no time.This article features:- Part Definition- Installation of the Universal