Motor Stuttering or Cutting OutUpdated 5 months ago
Instructions on how to troubleshoot motor cutting out or a stuttering motor issue with your Gen2 system.
1. Compressed Pins
If your pins have been compressed, this will cause the motor to spin intermittently. It may improve if you move the cable orientation or hold the plug.
Inspect the pins on your system and compare to the images below:
Compressed Pins
Correct Pins
If your pins are compressed like the image above on the left, follow these steps below.
a. Using a small Philips head screwdriver, very gently apply pressure to the inside of the pins to expand them back out like the image below:
2. Carbon fibre boards with Carbon Wrapped tracks
A small range of boards that are constructed with carbon fibre and carbon wrapped foil tracks are experiencing connectivity issues with the controller. To learn more, click here
For boards that have carbon fibre AND carbon tracks, click here
3. Controller not Connecting to System
If your controller has lost connection with the system, or you have received a new or replacement controller, click here.
If you are still having issues, please contact [email protected] with a description and video of your issue.
Related Articles - Click to read:
Motor Cleaning and Maintenance
Motor Plug Care, Maintenance and Installation
Foil Drive Motor Vibrating
Foil Drive Motor Design | Universal
To learn more, check out the other articles on our Help Centre which can be found under the 'Support' tab on the website.
As always, if you have any questions, please reach out to us at [email protected].
Happy Foil Driving!