Foil Drive logo
Foil Drive logo

All articles

Replacing the Box Lid | Gen1Updated 9 days ago

The box lids are easily replaced if they get worn, damaged, bent, broken or lost.



You'll Need:

- Replacement Box Lid

- Some muscle, but some care also


Process:

1. Remove old lid from box

Inspect the lid hinges to understand the direction you need to pull the lid away from the box.

With the lid almost fully open, work on one hinge at a time. 

2. Inspect new lid 

Ensure lid, hinge, latches and seal are not bent, damaged or have a moulding defect of any type.

3. Replace lid with new one

Placing the open section of the lid hinge over the bar on the box and pushing down one hinge at a time.

4. Test close the lid and latches 

Check for a solid tension when the latch is snapped closed.

5. Perform a "dunk test" to ensure the box water tightness


If you are not comfortable performing these tasks, you can of course contact [email protected] or your local dealer to arrange to send your motor to one of our authorised repair centres for a service.


Related Articles - Click to Read:
 Replacing the Box Latches | Gen1
 
Replacing Latch Protectors | Gen1
 Waterproof Cable Gland | Gen1
Removing the Cover from Electronics Box | Gen1


To learn more, check out the other articles on our Help Centre which can be found under the 'Support' tab on the website.

 

As always, if you have any questions, please reach out to us at [email protected]

 

Happy Foil Driving!


 

Was this article helpful?
Yes
No