Foil Drive logo
Foil Drive logo

All articles

Charging the Throttle ControllerUpdated 9 days ago

1. Plug in the supplied USB cable to the charge pad with a PSB power source. 

2. Place the controller on top with the circles (Labelled 4) face down. The ring around the pad will illuminate blue and the screen will turn on displaying charging information. You may need to move the controller around a little to find just the right spot. The Foil Drive logo on the controller should be facing up!

3. It takes approx. 1.5-2hr from flat to fully charged with about 5 hours of battery life, the controller screen will revert to the usual throttle percentage when complete.

Note: When charging correctly, controller screen will display "Charging". The controller will stop displaying "Charging" when full.

Always remove the controller from the charger pad when charging is finished to avoid un-necessary reduced battery lifespan to your controller battery. Do not leave controller on charge for more than four hours, as this may damage your controller.



For travel, we sell a Controller Charger Cradle that simply holds the charge pad and controller in position while charging on the move.

Note: Please do not leave the controller in the cradle for prolonged periods as this can damage the battery and charging circuit due to prolonged heat soak caused by the induction charger.

Once charging is complete, de-power the charge pad or remove the controller from the cradle.


Related Articles - Click to read:
 Foil Drive Controller Overview
Foil Drive Controller Features
Troubleshooting Controller Issues

Replacing Controller Triggers and Springs


To learn more, check out the other articles on our Help Centre which can be found under the 'Support' tab on the website.

 

As always, if you have any questions, please reach out to us at [email protected]

 

Happy Foil Driving!

Was this article helpful?
Yes
No