33 Results for "span"
Installing Motor Cable into Electronics Box | Gen1
If you ever need to remove and install a new motor, here are the instructions of how to do so and some very important steps to follow to ensure the safe and reliable use of your gear moving forward. WHAT YOU WILL NEED: - Thin 20mm spanner - ...
Lengthening or Repairing a Motor Cable | Gen1
... this in mind and check out our other article about Shortening a Motor Cable. You'll Need: - Soldering Skills - Regular 20mm Spanner or Shifter - Thin 20mm Spanner or Thin Shifter - Wire cutters / Side snip - Wire Stripper - Cyanoacrylate Super Glue and Accelerator ...
Shortening a Motor Cable | Gen1
... to send your motor to one of our authorised repair centres for a service. You'll Need: - Soldering Skills - Regular 20mm Spanner or Shifter - Thin 20mm Spanner or Thin Shifter - Wire cutters / Side snip - Wire Stripper - Cyanoacrylate Super Glue and Accelerator ...
Foil Drive Lithium-Ion Batteries Explained
... discharge of the battery is considered one cycle. - SOC: State of Charge. Life Expectancy Every battery in existence has a limited useful life span. From the day they are first created, batteries will slowly degrade over time, diminishing their ability to deliver full power output and ...
Lithium Battery Use, Care & Storage
... Battery? Best practice is to try and avoid running your battery below 5%. Your battery will last longer and have a better life span. Running the battery down to 0% often will age the battery faster and isn't good to do repeatedly. Warning: If ...
User Warnings
In order to operate the product correctly and minimise the chances of damage, serious injury or death, it is essential to read and follow all instructions and warnings published by Foil Drive in the User Manual provided and in these online articles and videos prior to assembly, ...
43V Standard Charger FAQ's
The charger isn’t switching to charge mode: Work through these in order: Power & reset: Plug the charger into a reliable AC 100–240 V outlet (protected circuit). If charging doesn’t start within ~20 s, turn the charger OFF ...
Choosing a Board - Tech Talk | Gen2
While almost any foil board with standard tracks will work with Foil Drive Gen2, some designs and shapes work better than others. In this Tech Talk, Paul and Jamie work through a small selection of the Foil Drive Fleet of demo and R&D boards and discuss ...