V3 Controller Tutorial - How to Use Your V3 ControllerUpdated 2 hours ago
The Foil Drive V3 Controller introduces a range of new features designed to improve ride control, tracking, safety, and usability. This guide walks you through setup and key menu functions so you can get the most out of your controller.
For best results, follow along with your controller in hand and ensure your firmware is updated before beginning.
1. Firmware Update (00:00)
Before first use, update your controller firmware to ensure full compatibility and access to the latest features and fixes.
- Connect your controller as per the manual instructions
- Check for available updates
- Install the latest firmware version
- Restart the controller once complete
2. Turning On (06:36)
- Press and hold the power button to turn the controller on
- Wait for the startup screen and system check
- Ensure the battery is connected and powered correctly
3. Menus Overview (07:03)
The V3 menu system allows you to customise performance and safety settings. Navigate using the controller interface to access each setting category.
4. Pairing (07:28)
Pair your controller to your Foil Drive system:
- Enter pairing mode on the controller
- Activate pairing on the Foil Drive unit
- Wait for confirmation of successful connection
5. Calibration (09:29)
Calibration ensures accurate sensor and control response.
- Follow on-screen prompts carefully
- Keep the controller steady during calibration
- Complete full calibration before riding
6. Throttle Mode (11:49)
Select how throttle input behaves:
- Choose preferred throttle response mode
- Match mode to riding style and experience level
- Confirm selection before exiting menu
7. Throttle Mapping (17:30)
Throttle mapping adjusts how power is delivered across input range.
- Fine-tune acceleration response
- Smooth or sharpen throttle curve depending on preference
- Test settings in a safe environment before use
8. Battery Voltage (25:14)
Displays real-time battery information:
- Monitor voltage during use
- Helps manage ride duration and return planning
9. GPS (28:26)
GPS features allow ride tracking and performance insights.
- Enable GPS for tracking speed and route data
- Ensure clear sky visibility for best signal
10. Tilt Sensor (30:13)
The tilt sensor improves safety and responsiveness.
- Detects orientation changes
- Helps manage power delivery and safety response
11. Lock on Start (34:01)
Prevents accidental activation on startup.
- Requires intentional input to begin throttle control
- Recommended for safety during transport and setup
12. THR Auto Lock (36:00)
Automatically locks throttle after inactivity.
- Reduces accidental power engagement
- Adjustable based on preference
13. Cruise Control (39:23)
Maintain consistent speed without continuous throttle input.
- Activate cruise control while riding
- Adjust or cancel at any time via controller input
14. Units (42:08)
Set preferred measurement units:
- Speed (km/h or mph)
- Distance (km or miles)
15. Screen Sleep (42:12)
Controls how quickly the display turns off when inactive.
- Helps conserve battery
- Adjustable timeout settings available
16. Brightness (44:13)
Adjust screen visibility:
- Increase brightness for sunny conditions
- Reduce for battery efficiency or night use
17. Auto Power Off (45:09)
Automatically powers down controller after inactivity.
- Helps preserve battery life
- Time interval can be adjusted
18. Factory Reset (46:08)
Restores default settings:
- Use if troubleshooting or starting fresh
- All custom settings will be erased
19. Regulatory (46:53)
Contains compliance and regulatory information relevant to operation and usage requirements.