Recalibrating TriggersUpdated an hour ago
The V2 Controller triggers can be re-calibrated to reset their minimum and maximum throttle positions.
Trigger calibration is rarely required, but it may be useful if the controller is not correctly detecting the full range of either trigger.
Click here to watch the YouTube video.
Re-Calibrating the Triggers
- Turn the controller on using the Power Button.
- Press and hold the Cruise Control Trigger, then single press the Power Button to enter the menu.
- Release the Cruise Control Trigger.
- Use short presses of the Power Button to scroll through the menu.
- Continue until the indicator arrow is next to 5. Calibration.
- Press and hold the Power Button to select Calibration.
The controller will now display the calibration screen.
Calibrate the Throttle Trigger
- Move the Throttle Trigger smoothly and completely from its resting position to 100%, then smoothly return it to its resting position.
- The screen should display OK to confirm the trigger has calibrated successfully.
Calibrate the Cruise Control Trigger
- Move the Cruise Control Trigger smoothly and completely through its full range, then smoothly return it to its resting position.
- The screen should display OK to confirm the trigger has calibrated successfully.
Important: Both triggers must display OK for the calibration to be successful. If anything other than OK is displayed, restart the calibration process and try again.
Save the Calibration
- Once both triggers have successfully displayed OK, press and hold the Power Button for approximately 4 seconds.
- The controller will return to the main menu.
- Press the Cruise Control Trigger to exit the menu.
The controller is now re-calibrated and both triggers should be correctly detecting their full range of movement.
If Calibration Is Unsuccessful
If either trigger does not display OK, repeat the calibration process.
Make sure each trigger is moved smoothly through its complete range, from fully released to fully pressed and back again.